• en
  • de
  • nl

Func­tion­al train­ing with
the Pix­for­mance sta­tion

What do I have to con­sid­er when train­ing with the Pix­for­mance sta­tion?

Func­tion­al
train­ing with the Pix­for­mance sta­tion

What do I have to con­sid­er when train­ing with the Pix­for­mance sta­tion?

Where should the Pix­for­mance Sta­tion be oper­at­ed?
  • Oper­ate the device only indoors /​ in closed rooms
  • Please make sure that the loca­tion is clean and dry and that cables and wires are installed safe­ly and with­out trip­ping
  • Choose a lev­el, non-vibrat­ing, non-reflect­ing sur­face for the station’s instal­la­tion. Rec­om­men­da­tion: Use over­volt­age pro­tec­tion
Which tech­ni­cal require­ments should be met?
  • For full use of the Pix­for­mance sys­tem, a per­ma­nent con­nec­tion of the sta­tion to the Inter­net via LAN cable is required.
Which con­di­tions should be observed when oper­at­ing your Pix­for­mance Sta­tion?
  • Tem­per­a­ture: not less than +10 degrees Cel­sius and not more than +28 degrees Cel­sius.
  • Humid­i­ty: between 30 and 75% — non-con­dens­ing
  • Air pres­sure: between 700 and 1060 hPa
How should the Pix­for­mance sta­tion be set up?
  • Light: Please avoid direct sun­light and frontal inci­dence of light on the cam­era. Select an area that is not too bright­ly lit
  • Min­i­mum dis­tance: to each side of the unit 1.50 m
  • Sen­sors: In the case of sev­er­al sta­tions, please ensure — in the case of oppos­ing devices — that the arrange­ment is off­set in order to avoid sen­sor inter­fer­ence
How should you oper­ate the Pix­for­mance sta­tion?
  • Please switch the device on and off exclu­sive­ly by press­ing the but­ton on the rear pan­el
  • Avoid inter­rupt­ing the pow­er sup­ply by pulling the pow­er cable with­out switch­ing it off first
What should you keep in mind when relo­cat­ing the Pix­for­mance sta­tion?
  • Please avoid fre­quent­ly mov­ing the sta­tion
  • If repo­si­tion­ing is nec­es­sary, use the rollers inte­grat­ed on the under­side of the device (see also the infor­ma­tion in the oper­at­ing instruc­tions) p. 12 f.
How large should the train­ing area of the Pix­for­mance sta­tion be?
  • The dis­tance to the device is approx. 2.30 m from the user
What else should you keep in mind when train­ing with the sta­tion?
  • Please avoid wear­ing high­ly reflec­tive cloth­ing dur­ing train­ing
  • Please do not cov­er joints (such as shoul­ders, neck) in addi­tion to nor­mal train­ing clothes
Use of small equip­ment
  • Posi­tion small devices with­in reach of the user, prefer­ably out­side the angle of detec­tion of the cam­era

Fur­ther ques­tions?
Get in touch